2.2KW 3Axis CNC Router Machine Complete Kit CNC Engraver 1000*1000mm

Description

Store category
Sign Up Now !
You may also like
3 Axis CNC Router Engraving Machine Water-Cool 2.2KW Spindle +VFD Inverter+ER20
Product Description
This is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine.
Based on C-Beam, V-Slot, Xtreme Solid V-Wheels and Tr8*8(P2) Lead screws it is strong, accurate and reliable.
With a CNC Kit you can manufacture functional engineering parts, toys, signs, or whatever you can imagine without leaving the workshop.
The
Cable Drag Chain  bundle
contains all the hardware for mounting Cable Drag Chains
Ox CNC or other CNC machine to help with cable management.
NVUM 3 Axis USB Controller Bundle
are perfectly used for engraving machine.
The
2.2KW Water Cooled Spindle
is a heavy duty router, and due to the water cooled system, is comfortably capable
of running for a long time without stopping. This makes it ideal for long, complicated jobs or applications.
Materials you can Mill/Cut/Carve & Engrave:
Aluminum
Hard Wood
Soft Wood
Oak
Plexi Glass
Delrin
HDPE
Foam
Dimension Details:
Travel (Cutting Area):
– X Axis:
800mm
– Y Axis:
770mm
– Z Axis:
122mm (85mm cutting depth )
Workable Material Height (max):
85mm
Drive System:
TR8x8(P2) ACME Lead Screw
Machine Accuracy:
0.05mm~ 0.10mm
Footprint:
1000mm x 1000mm (not including motors)
Specs of Nema23 (1.26 N.m) Stepper Motor:
NEMA23
Shaft Size: 1/4"
Step Angle: 1.8
Holding Turque: 1.26N.m
Rated voltage: 3.36A
Rated current: 2.8A
Specs of 2.2 kW Water Cooled Spindle:
Net weight: 5.3kg
Spindle Spec: φ 80 x 215 mm
Power: 2.2 kW
Voltage: 110 V
Frequency: 400 Hz
Speed: 0-24000 R/min
Water Cooling
Run-out off: less than 0.005 mm
Grease Lubrication
VFD Inverter 2.2kW 110V
Collet: ER20
Sizes: 1mm, 2mm, 1/8″, 4mm, 5mm, 6mm, 1/4″, 7mm, 8mm, 9mm, 10mm, 11mm, 1/2″, 13mm
PLEASE NOTE:
This full kit is default to send
110V
voltage of 2.2KW. This kit includes 4 x NEMA 23 Stepper Motors as standard!
Part List:
Screw Driven 1000x1000
Plates
Item name
Size
Qty
Y-Plate-Left
T6*253.94*180
1
Y-Plate-Right
T6*253.94*180
1
Y-Plate-Inner
T3*180*134.86
2
Y-End-Plate-Left
T6*104.8*120
2
Y-End-Plate-Right
T6*104.8*120
2
X-Plate-Front
T6*125*125
1
X-Plate-Back
T6*125*197.5
1
Z-End-Mount-Motor
T6*80*64.8
1
Z-End-Mount-Bottom
T6*80*60.95
1
Z-Plate
T6*125*125
1
End-Cap
T3*40*20
4
Extrusions
Item name
Size
Qty
V-Slot-2040
915mm
2
995mm
2
1000mm
1
V-Slot-2080
960mm
3
Z C-Beam
250mm
1
X C-Beam
1000mm
1
Y C-Beam
1000mm
2
Motion Components
Item name
Size
Qty
Xtreme solid v wheel kit
10.2*23.9
49
X-ACME-Screw
1031mm
1
Y-ACME-Screw
1031mm
2
Z-ACME-Screw
281mm
1
Anti-Backlash Nut Block
12*33*34
1
ACME-Nut-Block
T12*20*34
6
688ZZ-Bearing
8*16*5
8
Flexible-Coupler
6.35*8
4
Brackets & Spacers
Item name
Size
Qty
Angle Corner Bracket
20*20*17
8
Triple L Bracket
20*20*59.6
8
Eccentric spacer
10HEX*6
21
Aluminum Spacer
3mm
14
6mm
27
9mm
21
40mm
16
Precision-Shim
T1*5.2*10
14
8mm Shim
T1.58*8*12.73
8
Hardwares
Item name
Size
Qty
Lock Collar
8*14*7
8
T-nut
M5
80
Nylon lock nut
M5
53
Low profile screw
8mm
68
12mm
24
15mm
40
20mm
8
25mm
14
30mm
6
50mm
16
60mm
21
NEMA23-Stepper-Motor
1.26N.m
4
Drop In T Nut
M5
25
Cable Drag Chain Combo
15x30 Cable Drag Chain
/
3
Chain Mount
/
3
M5 Nylon Nut
/
9
M5 Drop In Tee Nuts
/
3
Low Profile M5 8mm
8mm
9
Low Profile M5 15mm
15mm
4
Controller Combo
4 Core Shielded Cable
4
2 Core Shielded Cable
3
DC Power Cable
1
Ground Wire
1
E-Stop Switch + E-Stop Cable
1
Limit Switch Kits
3
CNC Controller - 4 Axis USB - Novusun
1
Stepper Driver - TB6600 4A 40V
4
MEAN WELL Power Supply - 24V 350W
1
2.2KW Water Cooled Spindle Combo
2.2KW Water Cooled Spindle (DIA 80mm)
1
VFD Controller
1
Spindle Mount Kit (ID 80mm)
1
75W Water Pump
1
Water Pipes
1
ER20 collet chuck set from 1 mm to 13 mm
14
NOTE:
Maximum recommended speed for Lead Screws 1000mm or greater is 400RPM.
Kindly Note:
This Machine Not Including: MDF Working Table, Drill Bits.(available at local hardware store)
Extrusions are new and M5 tapped as where it is necessary!
PDF Assembly Manual is available by email.
Price not included softwares, please buy it from the official website!
We don't provide technical support for software debugging.
*
Any Mains power connections must be installed by a Licensed electrician or suitability qualified person!
Z Travel Explained:
To  clarify the Z Travel, this is not the max cutting depth or travel range of the acuator. Z Travel is the distance dowmwards it cantravel before hitting the spoiler board supports.
This has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm.The reason for the two configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is betterto have the work piece as closed to the Z-Actuator as possible, so in this case the machine should be  setup in the higher 66mmtravel configuration.
The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. In this case
54mm is maximum thickness of material that will fit on the machine.
To  calculate the max cutting depth for a chosen piece of material it is :
Max Cutting Depth = Z travel – Material Thickness
For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the maxcutting depth would be:
Max Cutting Depth = 54 – 30 = 24mm
This means with a 30mm piece of material it would not be possible to cut it the whole way though. The max thickness that canbe cut the whole way through is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material thatcould be cut the whole way through. And for the lower configuration the maximum thickness that can be cut the whole waythrough is 47mm.
Technical Specification:
Size
Frame Size
Working Area
1000 x 1000mm                                                                                    800 x 770mm
Z Height
54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard. The spolierboard supports have two height
configuration, these are the maximums for each configuration.
Motion
Drive Systerm
- ACME Lead Screws
Linear Guides
- Polycarbonate wheels on anodised C-Beam V-Slot Extrusion.
Motors
- NEMA23 175oz Stepper Motors (X, Y & Z)
Accuracy
- 0.05 - 0.10mm
Payment
Delivery details
feedback
return policy
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
NOTE：The item will be delivered by airmail ,USPS ,DPD ,DHL ,UKSHIPPING ,Since weekend and legal holiday. Please kindly allow
8
-15 working days for delivery. but it varies with different countries. Occasionally, it may take a bit longer time, due to local dispatches , Customs checking, High Season period, eg. x'mas or other reasons. Your patience is always appreciated!
7-12
working days to: USA
8-12 working days to: Canada,Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxembourg, Norway, Portugal, Sweden, Switzerland, Spain, Greece, United Kingdom
10-15 working days to: Other countries
feedback
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
return policy
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Jul-04-21 at 19:44:23 PDT, seller added the following information: