Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820
Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820
Enviro-Safe ProSeal XL4 & R22 Hose Kit
Part#: 9820
DO NOT USE IN AMMONIA SYSTEMS!
Kit includes:
​1 can Enviro-Safe Proseal XL4
1 each R12/22/502 hose with top tap #3345
Metal sealer for leaks in a/c condensers, evaporators, line sets and solder joints.
Proseal XL4 is used in home, heat pump and industrial applications.
One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.
If the a/c system is low on pressure, you need to pull a vacuum or you can use the Enviro-Safe Prodry XL4.
The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture causes corrosion and nobody wants that in their system!
If using the Enviro-Safe Prodry XL4 with the Proseal XL4, you do not need to empty the system to pull a vacuum.
For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes.
Do NOT use this item in a R410a system. You MUST use the Enviro-Safe Proseal XL4 Direct Inject line of products.
This listing is for an EPA regulated refrigerant, which may only be sold on our eBay community with the following disclaimer;
In order to purchase this item; You must be certified by the Environmental Protection Agency (EPA), under Section 608 or Section 609 of the United States Clean Air Act and as a result of the Montreal Protocol Established on September 15th, 1987.
You must show proof of certification before paying and before the item is shipped. Merely stating that you are "EPA certified", is not enough to satisfy these requirements.
*If you are a wholesaler and you are selling to a buyer who will resell the item to a certified buyer, you must state that you will keep sufficient records to establish that the purchaser of the refrigerant is going to resell it to certified technicians.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both The United States and Canada shipments.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required per United States Department Of Transportation CFR Title 49 Shipping regulations.
UPS Ground Only!
This item requires a "ADULT SIGNATURE"!
Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820 ---Enviro-Safe ProSeal XL4 & R22 Hose Kit ---Part#: 9820 ---DO NOT USE IN AMMONIA SYSTEMS! ---Kit includes: ------​1 can Enviro-Safe Proseal XL4 ------1 each R12/22/502 hose with top tap #3345 ---Metal sealer for leaks in a/c condensers, evaporators, line sets and solder joints. ---Proseal XL4 is used in home, heat pump and industrial applications. ---One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us. ---If the a/c system is low on pressure, you need to pull a vacuum or you can use the Enviro-Safe Prodry XL4. ---The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture causes corrosion and nobody wants that in their system! ---If using the Enviro-Safe Prodry XL4 with the Proseal XL4, you do not need to empty the system to pull a vacuum. ---For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes. ---Do NOT use this item in a R410a system. You MUST use the Enviro-Safe Proseal XL4 Direct Inject line of products.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820
Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820
Enviro-Safe ProSeal XL4 & R22 Hose Kit
Part#: 9820
DO NOT USE IN AMMONIA SYSTEMS!
Kit includes:
​1 can Enviro-Safe Proseal XL4
1 each R12/22/502 hose with top tap #3345
Metal sealer for leaks in a/c condensers, evaporators, line sets and solder joints.
Proseal XL4 is used in home, heat pump and industrial applications.
One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.
If the a/c system is low on pressure, you need to pull a vacuum or you can use the Enviro-Safe Prodry XL4.
The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture causes corrosion and nobody wants that in their system!
If using the Enviro-Safe Prodry XL4 with the Proseal XL4, you do not need to empty the system to pull a vacuum.
For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes.
Do NOT use this item in a R410a system. You MUST use the Enviro-Safe Proseal XL4 Direct Inject line of products.
This listing is for an EPA regulated refrigerant, which may only be sold on our eBay community with the following disclaimer;
In order to purchase this item; You must be certified by the Environmental Protection Agency (EPA), under Section 608 or Section 609 of the United States Clean Air Act and as a result of the Montreal Protocol Established on September 15th, 1987.
You must show proof of certification before paying and before the item is shipped. Merely stating that you are "EPA certified", is not enough to satisfy these requirements.
*If you are a wholesaler and you are selling to a buyer who will resell the item to a certified buyer, you must state that you will keep sufficient records to establish that the purchaser of the refrigerant is going to resell it to certified technicians.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both The United States and Canada shipments.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required per United States Department Of Transportation CFR Title 49 Shipping regulations.
UPS Ground Only!
This item requires a "ADULT SIGNATURE"!
Enviro-Safe Proseal XL4 and R22 hose for 22a A/C systems #9820
Enviro-Safe ProSeal XL4 & R22 Hose Kit
Part#: 9820
DO NOT USE IN AMMONIA SYSTEMS!
Kit includes:
​1 can Enviro-Safe Proseal XL4
1 each R12/22/502 hose with top tap #3345
Metal sealer for leaks in a/c condensers, evaporators, line sets and solder joints.
Proseal XL4 is used in home, heat pump and industrial applications.
One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.
If the a/c system is low on pressure, you need to pull a vacuum or you can use the Enviro-Safe Prodry XL4.
The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture causes corrosion and nobody wants that in their system!
If using the Enviro-Safe Prodry XL4 with the Proseal XL4, you do not need to empty the system to pull a vacuum.
For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes.
Do NOT use this item in a R410a system. You MUST use the Enviro-Safe Proseal XL4 Direct Inject line of products.