New 44" Towable snow tube, FACTORY 2nds, BLEMS, (5) ONLY, Made in USA

Description

We have (5) -only. New 44" Towable snow tubes. ALL are factory seconds, blems, but will function and slide fine.
The yellow/pink top is spliced from 2 colors at the end of the fabric roll. The 40 ounce Gloss bottom, has 2" adhesive tape glue,  and marks , 2" scrapes/creases in the running surface.
The Blue/Blue top
is spliced from 2 colors at the end of a  fabric roll. It Has a Green pocket, The 40 ounce GLOSS bottom has a 1" fabric splice right in the outer binding, but is NOT in the running surface. Bottom has tape glue, and creases.
The Orange/RED top is spliced from 2 colors at the end of the fabric roll. The 40 ounce Gloss bottom has 1-nickle sized  Dent in the sidewall, , but NOT in the running surface. Has tape glue and tape marks.
The Blue/CAMO top is spliced from 2 colors at the end of the fabric roll. The top Has tape glue. The 40 ounce GLOSS bottom has 5 -creases, 3- are in the running surface. Has Glue, tape marks etc.
The Black/Orange top has been spliced
from 2 colors at the end of the fabric roll.
The 40 ounce GLOSS bottom has been spliced 6" from the outer binding, but the splice is NOT in the running surface. We put the splice in the back.  Has Glue, tape marks etc.
These are ALL factory seconds, BLEMS, and the bottoms have glue, tape marks, dents, and creases.  They are priced accordingly. ALL come with a Brand new 20" I.D. Rubber inner tube, hand leash , internal leash, storage pocket. These are ALL one of a kind.  These 5 are all we could make out of the scraps , roll ends, that we had.
Originally designed for our ski area customers to transport guests to and from Snowtubing parks. This model is designed as a
low speed
towable snowtube.
ONLY TO BE USED FOR SPEEDS UNDER 10 MPH
on flat level terrain. This snow tube has all the features of our Commercial snowtubes but also adds the following upgrades:
Internal harness system made of heavyweight 1 " poly webbing goes around the entire circumference of the snowtube. This allows all the pull to be on the entire snowtube and not just on one point of the cover.
NEW
12 handle design:
(2) 1" x 9" heavy nylon belly handles located in the front seams for easy laydown snowtubing.
(4) 1" handles in the inner bind allow children easy access to multiple grab points.
(6) 1.5" heavy webbing handles circle the entire snowtube for easy reach for riders of all sizes.
Tow Loops on the front harness for a carabiner or snaplink.
Internal harness is free floating through sewn in loops, and can be replaced and removed.
44" Towable snowtube rider weight limit: 300 lbs.
Specs: 18.5 Oz Vinyl Coated polyester top, two heavyweight nylon webbing handles through brass grommets, two 1" x 9" belly handles in the front seams for lay down tubing. 40 oz Heavy duty commercial grade slick, GLOSS  bottom. Weight-13 pounds with rubber tube.