R134a, Refrigerant With UV Dye & Stop Leak Pro SealXL4, 28 oz. Recharge Kit

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R134a, Refrigerant With UV Dye & Stop Leak Pro SealXL4, 28 oz. Recharge Kit
R-134a  Refrigerant 134a  With UV Dye & Stop Leak-Pro Seal XL4.
(1) 28 oz. Can of R134a with UV DYE & LEAK STOP, Pro-SealXL4
(1) CGA-C10 Can Taper with 1/4" hose connection and self-Sealing valve core.
*UV Dye helps locate any leaks with a white cloth or a UV Light.
Fully compatible with mineral, ester, and pag oils
Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs to help them locate the leak.
This product performs best in coolers, freezers, auto A/C units,  soda coolers, and commercial refrigeration units.
Applications: Walk-in coolers and Freezers
DO NOT use in ammonia systems
No need to pump-down R134a systems.
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
*Stop Leak (Pro-Seal XL4)
ProSeal XL4 (Leak Stop) is compatible with all refrigerants except ammonia.
Pro-Seal XL4  performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Unlike most other products on the market, ProSeal XL4 Itravels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in coolers, freezers and auto A/C systems and commercial refrigeration systems.
DO NOT use in ammonia systems
No need to pump-down R12 systems.
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
Includes CGA-C10 Can Taper with a 1/4" Hose Connection and Valve core. (Self-Sealing as required by EPA)
R134a Refrigerant w/ UV Dye & Stop Leak 28oz Disposable One Step Can.
Free shipping is for continental USA only!
The hose connection on this can is standard 1/4” male flare with valve core, self sealing as required by the EPA.
The hose you use to connect to this can MUST have a valve core depressor on the hose end.
Shipping is by Ground only with UPS.
Item ships as a Hazardous Materials package, ORMD as specified per US DOT CFR49.
As of 01-2018, refrigerant R134a or R1234yf sold in 2 lb. containers or less, does not require EPA certification to purchase as indicated on the EPA web site under "Refrigerant Sales Restrictions".
As indicated on the EPA Web Site under "Refrigerant Sales Restrictions", and as of January 01, 2018, refrigerant R134a and R1234yf that is sold in containers of 2 Lbs. (32 oz.) or less, does NOT require EPA Certification to purchase.
This is directly from the EPA Web Site......
" Small cans of non-exempt MVAC (Motor Vehicle Air Conditioning) Refrigerant for example,  (containers designed to hold two pounds or less) that have unique fittings, and self-sealing valves, can continue to be sold to persons without EPA Certification for DIY (Do-It-Yourselfers) on their vehicles.
This item ships UPS-Ground as a Hazardous Material Package under the "ORM-D" Limited Quantities exemption as listed in DOT-US CFR49 shipping regulations.
R-134a Refrigerant 134a With UV Dye & Stop Leak-Pro Seal XL4. (1) 28 oz. Can of R134a with UV DYE & LEAK STOP, Pro-SealXL4 (1) CGA-C10 Can Taper with 1/4" hose connection and self-Sealing valve core. *UV Dye helps locate any leaks with a white cloth or a UV Light. ---Fully compatible with mineral, ester, and pag oils ---Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs to help them locate the leak. ---This product performs best in coolers, freezers, auto A/C units, soda coolers, and commercial refrigeration units. ---Applications: Walk-in coolers and Freezers ---DO NOT use in ammonia systems ---No need to pump-down R134a systems. ---No injection-hose or caulk-gun needed ---Concentrated formula means less material in the system *Stop Leak (Pro-Seal XL4) ProSeal XL4 (Leak Stop) is compatible with all refrigerants except ammonia. Pro-Seal XL4 performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Unlike most other products on the market, ProSeal XL4 Itravels with the gas, which makes it faster, and more effective at finding leaks. ---ProSeal XL4 will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. ---Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. ---If there is still Proseal XL4 in the system it will reseal the schrader. ---This product performs best in coolers, freezers and auto A/C systems and commercial refrigeration systems. ---DO NOT use in ammonia systems ---No need to pump-down R12 systems. ---No injection-hose or caulk-gun needed ---Concentrated formula means less material in the system Includes CGA-C10 Can Taper with a 1/4" Hose Connection and Valve core. (Self-Sealing as required by EPA) R134a Refrigerant w/ UV Dye & Stop Leak 28oz Disposable One Step Can. Free shipping is for continental USA only! The hose connection on this can is standard 1/4” male flare with valve core, self sealing as required by the EPA. The hose you use to connect to this can MUST have a valve core depressor on the hose end. Shipping is by Ground only with UPS. Item ships as a Hazardous Materials package, ORMD as specified per US DOT CFR49. As of 01-2018, refrigerant R134a or R1234yf sold in 2 lb. containers or less, does not require EPA certification to purchase as indicated on the EPA web site under "Refrigerant Sales Restrictions".
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R134a, Refrigerant With UV Dye & Stop Leak Pro SealXL4, 28 oz. Recharge Kit
R-134a  Refrigerant 134a  With UV Dye & Stop Leak-Pro Seal XL4.
(1) 28 oz. Can of R134a with UV DYE & LEAK STOP, Pro-SealXL4
(1) CGA-C10 Can Taper with 1/4" hose connection and self-Sealing valve core.
*UV Dye helps locate any leaks with a white cloth or a UV Light.
Fully compatible with mineral, ester, and pag oils
Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs to help them locate the leak.
This product performs best in coolers, freezers, auto A/C units,  soda coolers, and commercial refrigeration units.
Applications: Walk-in coolers and Freezers
DO NOT use in ammonia systems
No need to pump-down R134a systems.
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
*Stop Leak (Pro-Seal XL4)
ProSeal XL4 (Leak Stop) is compatible with all refrigerants except ammonia.
Pro-Seal XL4  performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Unlike most other products on the market, ProSeal XL4 Itravels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in coolers, freezers and auto A/C systems and commercial refrigeration systems.
DO NOT use in ammonia systems
No need to pump-down R12 systems.
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
Includes CGA-C10 Can Taper with a 1/4" Hose Connection and Valve core. (Self-Sealing as required by EPA)
R134a Refrigerant w/ UV Dye & Stop Leak 28oz Disposable One Step Can.
Free shipping is for continental USA only!
The hose connection on this can is standard 1/4” male flare with valve core, self sealing as required by the EPA.
The hose you use to connect to this can MUST have a valve core depressor on the hose end.
Shipping is by Ground only with UPS.
Item ships as a Hazardous Materials package, ORMD as specified per US DOT CFR49.
As of 01-2018, refrigerant R134a or R1234yf sold in 2 lb. containers or less, does not require EPA certification to purchase as indicated on the EPA web site under "Refrigerant Sales Restrictions".
As indicated on the EPA Web Site under "Refrigerant Sales Restrictions", and as of January 01, 2018, refrigerant R134a and R1234yf that is sold in containers of 2 Lbs. (32 oz.) or less, does NOT require EPA Certification to purchase.
This is directly from the EPA Web Site......
" Small cans of non-exempt MVAC (Motor Vehicle Air Conditioning) Refrigerant for example,  (containers designed to hold two pounds or less) that have unique fittings, and self-sealing valves, can continue to be sold to persons without EPA Certification for DIY (Do-It-Yourselfers) on their vehicles.
This item ships UPS-Ground as a Hazardous Material Package under the "ORM-D" Limited Quantities exemption as listed in DOT-US CFR49 shipping regulations.
R-134a  Refrigerant 134a  With UV Dye & Stop Leak-Pro Seal XL4.
(1) 28 oz. Can of R134a with UV DYE & LEAK STOP, Pro-SealXL4
(1) CGA-C10 Can Taper with 1/4" hose connection and self-Sealing valve core.
*UV Dye helps locate any leaks with a white cloth or a UV Light.
Fully compatible with mineral, ester, and pag oils
Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs to help them locate the leak.
This product performs best in coolers, freezers, auto A/C units,  soda coolers, and commercial refrigeration units.
Applications: Walk-in coolers and Freezers
DO NOT use in ammonia systems
No need to pump-down R134a systems.
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
*Stop Leak (Pro-Seal XL4)
ProSeal XL4 (Leak Stop) is compatible with all refrigerants except ammonia.
Pro-Seal XL4  performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Unlike most other products on the market, ProSeal XL4 Itravels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in coolers, freezers and auto A/C systems and commercial refrigeration systems.
DO NOT use in ammonia systems
No need to pump-down R12 systems.
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
Includes CGA-C10 Can Taper with a 1/4" Hose Connection and Valve core. (Self-Sealing as required by EPA)
R134a Refrigerant w/ UV Dye & Stop Leak 28oz Disposable One Step Can.
Free shipping is for continental USA only!
The hose connection on this can is standard 1/4” male flare with valve core, self sealing as required by the EPA.
The hose you use to connect to this can MUST have a valve core depressor on the hose end.
Shipping is by Ground only with UPS.
Item ships as a Hazardous Materials package, ORMD as specified per US DOT CFR49.
As of 01-2018, refrigerant R134a or R1234yf sold in 2 lb. containers or less, does not require EPA certification to purchase as indicated on the EPA web site under "Refrigerant Sales Restrictions".